Installation Manual
Ground Roof
Mount Series
[email protected] 1-800-819-7236 Ext 556
Page 8
Final Assembly
Step: 1
Attach U-foot to footings
A. Attach the U-foot and backing plate to your footings, align the feet east\west and north\south
and torque 3/8-16 galvanized hardware to 16 ft-Lbs. (Concrete footings shown)
Space between
mounts
Step 2: Attach Preassembled rear braces to footings.
A. Loosely attach the pre-assembled rear brace to the rear footings (pre-assembled from the
prior angle determination step). The “outer leg” is attached to the foot. Lay back away from
the front for next step.
