TALOS ITR-T250
8
www.talospos.com
Connect to Power
1.
Make sure the power is unplugged and the printer is powered off before connecting to the power cord.
2. Connect to power
3. Turn on the power switch on the printer side to connect to the power supply.
Printer Control Panel
Control Board
Setting Printer Mode
ITR-T250 printer is initially setup with default value. However, the default printer mode can be reconfigured to satisfy
customer’s needs through the DIP switch, which is located at the bottom of the printer.
Power Cable
AC adapter
Power light-Light appears when connected to the power supply.
Error light-Light appears under the following condition:
1
．
Printer overheats
2
．
Receipt Paper Low
3
．
Roll Paper Cover and/or cutter replacement error
Low Receipt Paper Light-Light appears when the receipt paper
roll is low and/or wrong replacement of the paper.
Feed key-Press feed key to generate a length of paper.
