manualshive.com logo in svg

Talos Security DR1600, User Manual, Page: 47 / 52

Share
Download
Talos Security DR1600 User Manual Download Page 47

 

 

 

                                                                                                                                   

47 

PTZ SETTING 

Click "PTZ Setting" to enter the Pan Tilt Zoom camera setting interface. 
 

Channe

 allows you to assign the settings to a specific camera and DVR channel. 

Protocol

 allows you to select the control language the DVR will use to communicate with the camera. 

Address

 allows you to match the DVR channel and camera; DVR and camera address must match. 

Buad Rate

 allows you to set the rate at which information is transmitted from the DVR to the camera. 

Data Bit

 allows you to set the size of each "character" transmitted from the DVR to the camera. 

Stop Bit

 allows you to set the bit that marks the end of a character transmitted from the DVR. 

Verify

 allows equipped cameras to communicate receipt of a direction to the DVR. 

 

 

NETWORK SETTING 

Click "Network Setting" to enter the network settings interface. 

Basic Attributes 
Type

 allows you to select the network connection you will use with your DVR; DHCP or Static. 

IP Address

 allows you to set a specific address on your network. 

Preferred DNS

 allows you to use the DVR with an external IP address and Domain Name Service. 

Media Port

 is the port on your router the DVR uses to transmit a video stream. 

Gateway

 is the address of your router on your network. 

MAC

 is the specific identity of the DVR allowing devices to find it on a network. 

Netmask

 is the address of the DVR on a sub-group of your network. 

Web Port

 is the port on your router the DVR uses to receive requests from the internet. 

PPPoE 
PPPOE Enable

 allows you to turn PPPoE ON or OFF. 

User Name

 is the name used to access the DVR by PPPoE. 

Password

 is the password used to access the DVR by PPPoE. 

DDNS

 

DDNS

 Enable turns DDNS ON or OFF. 

Service

 allows you to select the DDNS service you are using. 

Host Name

 is the host name you created when you opened your DDNS account. 

User Name

 is the user name you created when you opened your DDNS account. 

Password

 is the password you created when you opened your DDNS account. 

 
 

Summary of Contents for DR1600





















































Reviews:

No comments