TW5350 Installation Manual
6
3
Equipment Installation and Operation
3.1
Information regarding installation
Tallymatics provides wiring instructions to electrically connect the TW5350 device
consistent with industry best practices.
3.2
Installation Considerations
The TW5350 is mounted using the integrated fixed mount feature. For optimal
performance, the device should be securely mounted to the surface of a large ground
plane when possible. Recommended minimum 10cm ground plane with the antenna
located at the center.
The TW5350 has a 5-meter cable terminated with an RJ45 connector. Adaptor cables are
available to interface to a PC and a variety of mobile radio devices. Please contact
Tallymatics for details.
The fixed mount installation requires a hole with minimum 0.75-inch (19mm)
diameter and must accommodate the routing of the attached data cable.
The TW5350 Antenna assembly contains the following parts:
TW5350 receiver Antenna with 5 Meter cable and RJ45 termination
Two 0.75” (19mm) panel nuts.
One metal washer
A rubber gasket installed on the lower side of the TW5350
