Quick start guide
Paper handling
19
ENGL
IS
H
Single sheets
Make sure that the printer is set to single sheet mode. If nec-
essary, change the paper type (see “Changing the paper
type”, page 15).
Press the latch at the middle of the front cover. The single
sheet input tray opens downwards.
Install the paper support as required for the paper
width. You can use an additional paper support in
order to position wide single sheets properly (see
“Accessories”, page 30).
Align the left paper guide with the mark on the left of the sin-
gle sheet input tray marking the first printing position.
Adjust the right paper guide to the width of the paper used.
Insert one single sheet into the input tray as far as possible.
Press the
Online
key to set the printer to ready status. The
sheet is automatically loaded when the printer is in online
mode and receives data from the computer.
The printer reports a paper out condition by displaying
Load
paper from single
and beeping.
Press the
Load
(4) key to load paper before starting the print-
out.
pull
to o
pen
pull
to o
pen
Quick Start-en.book Seite 19 Dienstag, 22. Juni 2004 1:33 13
