TallyGenicom 6605, User Manual

Page: 21 / 212

21
3
Operating The Printer
Powering On The Printer
When you power on the printer, it executes a self-test. The default power-up
state is offline. When the self-test completes and the software has initialized
successfully, the status indicator light is off, indicating the printer is offline.
When the printer is online, the default emulation type you have installed
appears in the upper-right corner of the display. The configuration name or
ribbon life remaining is shown on the second line.
If there is a fault during the self-test, the status indicator flashes and a specific
fault message appears on the display (such as “LOAD PAPER”). The alarm
also sounds if it is configured to do so. See “ LCD Message Troubleshooting
Table” on page 123 for information on fault messages and solutions.
Operating Modes
Online. In online mode, the printer can receive and print data sent from the
host. Pressing the ONLINE key toggles the printer from online to offline mode.
The status indicator is lit in online mode.
Offline. In offline mode, you can perform operator functions, such as loading
paper and setting top-of-form. You can also move within the printer
configuration menus. Pressing the ONLINE key toggles the printer from offline
to online mode. The status indicator is off in offline mode.
Fault. In fault mode, a condition exists which must be cleared before printing
can continue. The status indicator flashes, the alarm beeps (if configured to
sound), and a descriptive fault message displays.
The current operating mode can be selected via control panel keys or can
result from routine operations such as powering on the printer.