TallyGenicom 6600 Series, Applications Manual

Page: 39 / 330

12 CPI
39
12 CPI
The 12 CPI character set is 0.1 inches high and is selected with the following
special Graphics Pass command.
Command ^{M,U,V,E}0001jjD<data>-
Arguments
^{M,U,V,E} One of four Graphics Pass orientations (^M for
horizontal, ^V for clockwise rotation, ^E for
counterclockwise rotation, or ^U for upside down
and reverse order of characters).
0001 A height/width value of 0001 specifies 12 cpi
characters.
jjd Justification values in increments of 0.1 inches
(0.25 cm) and dot rows, as in the Graphics Pass
command description. This field may be omitted
entirely if the justification value is zero.
<data> The characters to be printed.
Example: The Graphics pass ^M000100012 CPI CHARACTERS^- prints:
15 CPI
The 15 CPI character set is 0.1 inches high and is selected using the following
command.
Command ^{M,U,V,E}0100jjD<data>^-
Arguments
^{M,U,V,E} One of four Graphics Pass orientations (^M for
horizontal, ^V for clockwise rotation, ^E for
counterclockwise rotation, or ^U for upside down
and reverse order of characters).
0100 A height/width value of 0100 specifies 15 cpi
characters.
jjd Justification values in increments of 0.1 inches
(0.25 cm) and dot rows, as in the Graphics Pass
command description. This field may be omitted
entirely if the justification value is zero.
<data> The characters to be printed.
Example: The Graphics Pass ^M010000015 CPI CHARACTERS^- prints: