TallyGenicom 6600 Series, Applications Manual

Page: 227 / 330

Special Features
227
For the parameter (n), a distinction must be made between two types of
representation:
•
if the parameter is in pointed parentheses, the decimal value must be
transmitted
•
if the parameter is not in pointed parentheses, the ASCII value must be
transmitted
Example:
Parameter representation: <n>, with n=0
to be transmitted: dec.0 (hex.00)
Parameter representation: n, with n=0
to be transmitted: ASCII "0" (hex.30, dec.48)
Character explanation and symbol descriptions
Special Features
If you did not receive the required Barcode control codes from the ASCII code
table columns 0 and 1 from your computer, use a set of MTPL sequences to
generate these control codes by printable ASCII characters. The Barcode
programs will remain fully compatible in spite of the additional MTPL
sequences.
The following control codes in Barcode strings can be substituted by the
appropriate ANSI sequences:
Table 43. Barcode Strings Control Codes
Control Code
ANSI Sequence
(CSI = Hex 9B or
Hex 1B 5B or ESC[)
Example (Hex)
SUB CSI 26 Space s 1B 5B 32 36 20 73
EM CSI 25 Space s 1B 5B 32 35 20 73
DC4 CSI 20 Space s 1B 5B 32 30 20 73
DLE CSI 16 Space s 1B 5B 31 36 20 73
SI CSI 15 Space s 1B 5B 31 35 20 73
ANSI sequences without matching parameters will be ignored.
Information/important notes
[ ] Optional, must be not necessarily be transmitted
9-needle printer
24-needle printer