Tally T8024, User Manual

Page: 20 / 266

xviii
Three power specifications are listed below. The specifications that apply to your
printer depend on its configuration. Connect the power plug only to a properly
rated power outlet. Otherwise, it can cause fire or electric shocks. If in doubt, con-
tact your dealer.
• Rated voltage: 100 V
Rated frequency: 50/60 Hz
• Rated voltage: 110-127 V
Rated frequency: 60 Hz
• Rated voltage: 220-240 V
Rated frequency: 50/60 Hz
Ensure that the plug connection is clean. In a damp environment, a contaminated
connector can draw a sufficient amount of current that can generate heat and
eventually cause fire over an extended period of time.
Always use the power cord provided with your printer. When an extension power
cord is required, always use a properly rated cord.
Do not attempt to modify, pull, bend, chafe, or otherwise damage the power cord.
Do not place a heavy object on the cord. A damaged cord can cause fire or electric
shocks.
Never touch a power cord with wet hands. This constitutes an electric shock haz-
ard.
Stop operation immediately if your printer emits smoke, excessive heat, unusual
noise or smell, or if water is spilt onto the printer. These conditions can cause fire.
Immediately turn off and unplug the printer, and contact your dealer.
Precautions for Power and Earth Connections