Tally Dascom T2265+, User Manual

Page: 77 / 196

User guide The Menu
67
Skiping perforation (Skip)
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Default Setting: 0.0 Inch
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Selecting start signal for
escape sequence
(ESCChar)
Selects the start signal for control sequences. Setting ESC: Only
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
mation see the section
The $$ procedure (page 148) .
Press ESCChar (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: ESC/ESC+$$
Default Setting: ESC
Confirm the setting by pressing the Set key (1).
LPI Skip
Online
Setup
2 1 3 4
Back Next
Skip= 0.0 Inch *
Online
Setup
Set < > Exit
2 1 3 4
ESCChar Emulate
Online
Setup
2 1 3 4
Back Next
ESCChar=ESC *
Online
Setup
Set < > Exit
2 1 3 4