The control panel
User Guide
Setup mode
In this mode, the following settings are available:
▸
Setup
key: Sets the printer to setup mode, in which the
following settings can be selected:
▸
Menu
key (1):
Other menu settings. Access may be
disabled by the manufacturer (see note
below).
▸
Adjust
key (2):
Sets the Tear position, first printing line and
print head gap.
▸
Paperway
key (3): Sets the Paper path.
▸
Char
key (4):
Sets the font and the number of characters
per inch.
Proceed as follows to release this lock temporarily:
Hold depressed the
Setup
key or the
Menu
key (1) for five seconds.
Or:
1
Switch off the printer for approx. 5 seconds.
2
Switch the printer on again keeping the
Setup
key pressed until Online is displayed then let up.
For information on how to enable access permanently and about the available settings,
refer to the section
Menu lock (MenLock)
and
Menu parameters
.
The settings for Font and CPI are lost when the printer is powered off. The section
Selecting Font (Font)
explains how to set fonts permanently.
22
Access to the other menu settings (Menu) may be disabled by the model - disabled by the
manufacturer.
