Tally Dascom DL-830
User Guide V1.0
27
2.7 Connect the interface
This printer provides USB and LAN interfaces for standard shipment. Parallel option is available.
You may decide to install additional interface to the backside of the printer.
The procedures to connect the standard interface:
1. Disconnect or switch off the power supplied to the printer.
2. Plug in one end of the interface cable to the corresponding interface port.
3. Plug the other end of the cable to the PC port.
Parts
Descriptions
Power socket
Connect to the connector on the power cord.
Power switch
Toggle it to turn the printer on or off.
USB interface
Communicate with the PC via USB connection. (standard
interface)
LAN interface
Communication with the LAN server. (standard interface)
）
Optional Interface
Reserve for the installation of option: parallel
Requirements for interface cables:
To prevent radio emission and interference, completely shielded cable with conductive connector
housing should be used. Consider the following factors to reduce emission/interference levels:
Use short interface cables. (Less than 1.5 m in length is recommended.)
Separate the interface cable from the power cord.
Avoid routing the interface cable within the power duct.
Power
switch
Optional
interface
Power socket
LAN interface
USB interface
