VOIP-200 Series IP Call Station
Configuration and Operation Manual
Page
8
of
8
Copyright 2015 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone Co. All
rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
3.5. Set Date& Time
3.5.1. Time Settings:
Select
Enable NTP
to set the VOIP-200 to use Network Time Protocol.
If using NTP, enter the
Hostname/IP Address
of the NTP Server.
If using NTP, select the
Time Zone
from the drop-down menu.
If manually entering the date and time, enter the
Date
in yyyy-MM-dd-hh-mm format.
Click
Save
to save settings. NTP settings will automatically update the date / time.
3.6. Relay
3.6.1. Relay Settings:
Remote Digit For Relay ON:
Specify the digit entered during a conversation to activate the relay until a
de-activation event occurs.
Remote Digit For Relay OFF:
Specify the digit entered during a conversation to de-activate the relay.
Remote Digit For Timed Relay On:
Specify the digit to turn ON the relay for a specific duration of time.
When this digit will is pressed during a conversation, the replay will remain on for the duration of the
time specified under the
‘
Timed Relay Duration’
field.
Outgoing Call:
Specify the relay state when the button is pressed. To activate the Talkaphone strobe
light connected to the
Auxiliary Output, set this value to ‘ON’.
Idle:
Specify the relay state when the VOIP-200 returns to an idle state after the call terminates. To de-
activate the Talkaphone strobe light
after the call is complete, set this value to ‘OFF’.
