VOIP-200 Series IP Call Station
Configuration and Operation Manual
Page
6
of
8
Copyright 2015 Talk-A-Phone Co.
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone Co. All
rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
3.2. Main Settings
3.2.1. Station Mode
Set the Station Mode to SIP.
3.2.2. IP Settings
The IP Settings page allows you to configure the IP settings and the hostname of the VOIP-200.
To set IP settings:
Select
DHCP
–
Automatic Configuration OR
Static IP
- Manual Configuration.
Enter network details
IP Address
,
Subnet Mask, Default Gateway
of your network for Static IP - Manual
Configuration.
Enter
DNS Server
to resolve domain names.
Enter
Hostname
. Use a unique identifier for each device on the network.
Click
Save
to save settings.
3.3. SIP Settings
This page is used to configure the phone number, SIP registrars and outbound proxy details.
To configure SIP settings:
Enter the
Display Name
(caller ID of the VOIP-200)
Enter the
Directory Number
(number used to call from other SIP endpoints).
Enter
SIP registrar
details: (Backup Domain details can be assigned for failover)
Server Domain (SIP)
: Configure the IP Address of the SIP registrar on which you want to register
the VOIP-200.
Authentication Username
: This is an optional field however it is required when Authentication is
enabled on the SIP registrar. Valid entries include alphanumeric and special characters.
Authentication Password
: This is an optional field however it is required when Authentication is
enabled on the SIP registrar. Valid entries include alphanumeric and special characters.
Port
: Configure the IP Address and Port of the SIP registrar on which you want to register the VOIP-
200. Valid port range is 1024-49151.
Re-registration Time
: Configure the registration refresh time. On expiration of this time interval, the
VOIP-200 automatically sends a new register request to the registrar. Default re-registration time is
3600 seconds. Valid range is 10-14400 seconds.
