ETP-CI-4G-V
Cellular Interface for Verizon
Installation Instructions
Page
5
of
5
Rev. 12/10/2020
Copyright 2020 Talk-A-Phone, LLC
• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com
All prices and specifications are subject to change without notice. Talk-A-Phone, Talkaphone, Scream Alert, WEBS, and WEBS Contact are registered trademarks of Talk-A-Phone, LLC.
All rights reserved. All other trademarks mentioned in this document or website are the property of their respective owners and does not imply or indicate any approval, endorsement,
sponsorship, or affiliation with such owners unless such approval, endorsement, sponsorship, or affiliation is expressly indicated.
VI. Activation of Cellular Service
Obtain 4G voice over LTE service (i.e. voice and data) from Verizon. Per the aforementioned installation
instructions, install an activated micro-SIM card provided by Verizon into the
ETP-CI-4G-V
Cellular Interface.
VII. Programming the ETP-500 Series Phone
The ETP-500 Series Phone requires specific programming for operation with the
ETP-CI-4G-V
Cellular
Interface. At minimum, the ETP-500 Series Phone should be programmed with the following codes:
* 4 **
* 13 * <Phone_Number_to_Dial> *
* 14 * 1 *
* 18 * 5 *
* 24 * 0 *
* 27 * 0 *
* 55 *
* 56 *
* 58 * <Speak_to_Record_Voice_Message>(optional)
For a full comprehensive list of programming codes, reference the Installation & Operation Manual for
Emergency/Information Phones.
