Talius Habitat Screen
TM
Installation Guide
Version 2018.1
,
15
©TALIUS
SECTION TEN: FINISHING
9.1)
Pull off the protective film from the panel box top and bottom and other parts that may be covered. Slip
the lip of the panel box lid into the corresponding groove of the panel box top and attach it with the supplied
screws. If space requirements do not permit the use of all four screws, choose either only the two lower ones
or the two upper ones.
9.2) PVC Screw Caps:
Insert the PVC screw caps over the mounting holes in the
guide rails or the 7/8” build
up depending on the mounting method
9.3) Bottom Stops
:
For specific Habitat Screen applications, install a bottom stop into each guide rail.
9.3) Caulking:
Caulking around the top of the panel box and guild rails will help to prevent water from
penetrating behind the Habitat Screen and to ensure a clean finished appearance.
9.4)
Wipe clean as necessary.
_________________________________________________________________________________
The installation is now complete. Every installation is different and there may be some questions. Do not
hesitate to call us from site for support, 1-800-665-5550. A properly installed Habitat Screen will operate
trouble-free for many years to come.
Warranty Registration
Please have your customer visit
www.talius.com
to register their warranty. They will receive a complete
warranty copy via email after registering. If preferred, the Talius Dealer can register the warranty on the
customer’s behalf.
