TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
27
of
76
Too big push of the brushes against the cleaned surface causes faster wear of the brushes
7.2.1 Manual emptying of dustbin
Dustbin opening and closing is done by pulling the
cord which causes the joint to break in order to
open and close.
7.2.2 Hydraulic emptying of dustbin
The dustbin emptying is made via the change of the direction of oil in the hydraulic system where the
return of oil creates the pressure needed for bin opening.
After the dustbin emptying the original oil circuit is re-set in order to allow the sweeper to work.
ATTENTION:
Dustbin opening and closing can be
performed only with raised sweeper!!!
7.2.3 Sweeper’s work without the dustbin
We can easily dismantle dustbin to use the
sweeper to work without bin as well as re-
install it.
When using dustbin with manual emptying
