Talex BOCIAN 170, Original User Manual, Page: 13 / 31

TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail. biuro@talex-sj.pl
en.talex-sj.com
13
Service after work
Each time after finishing work, the machine should be cleaned and placed on a flat, hard
surface. You should review the connections of parts and assemblies. Damaged parts
and worn ones must be replaced. Check all bolted connections and tighten loose bolts
according to table 2 - tightening torques for nuts and bolts.
Table 2 – tightening torques.
Durability 6.8 8.8 10.9 12.9
Metric thread Tightening torque [Nm]
M5 4,5 5,9 8,7 10
M6 7,6 10 15 18
M8 18 25 36 43
M10 37 49 72 84
M12 64 85 125 145
M14 100 135 200 235
M16 160 210 310 365
M18 220 300 430 500
M20 310 425 610 710
M22 425 580 820 960
M24 535 730 1050 1220
Off-season service
It covers all activities listed in the section after work service. In addition, the machine should
be stored under a roof on a flat and hard surface. Pay attention to the tightness of the varnish
coat. In the event of cavities, these areas should be cleaned and the deficiencies filled by
applying a fresh layer of protective paint.