TALESUN TP572M-170, Installation Manual

Page: 9 / 20

INSTALLATION MANUAL FOR CRYSTALLINE SOLAR PHOTOVOLTAIC MODULES
Version: A2 Effective Date: May 13, 2015
ZHONGLI TALESUN SOLAR COMPANY LIMITED
Address: No. 1 Talesun Road, Changkun Industrial Park, Shajiabang Town, Changshu, Suzhou, Jiangsu Province, 215542, P.R.China
Website: www.talesun.com Email: sales@talesun.com Tel: +86 400 885 1098
8 / 19
Module Type
Module Dimension
Length*Width*Thickness
Load
A
Distance from module
edge to clamping zone
B
Clamping zone
TP672 series
1960mm*990mm*40mm
2400Pa 400mm 100mm
5400Pa 400mm 100mm
1960mm*990mm*45mm
2400Pa 400mm 100mm
5400Pa 400mm 100mm
1960mm*990mm*50mm
2400Pa 400mm 100mm
5400Pa 400mm 100mm
TP660 series
1640mm*990mm*35mm
2400Pa 250mm 100mm
5400Pa 250mm 100mm
1640mm*990mm*40mm
2400Pa 250mm 100mm
5400Pa 250mm 100mm
TP648 series
1324mm*990mm*35mm
2400Pa 200mm 100mm
5400Pa 200mm 100mm
1324mm*990mm*40mm
2400Pa 200mm 100mm
5400Pa 200mm 100mm
TP572 series
1580mm*808mm*35mm
2400Pa 200mm 150mm
5400Pa 200mm 150mm
1580mm*808mm*40mm
2400Pa 200mm 150mm
5400Pa 200mm 150mm

Use a torque wrench for installation, and the compression for each clamps is not strong to avoid potential damages to
module frames. The recommended maximum compression for each clamp is 20MPa (2900PSI).

The module mounting structure must be made of durable, corrosion-resistant and UV-resistant material. All mounting
hardware (bolt/flat washer/split washer/nut) should be stainless steel M8 size.

The minimum recommended length for each clamp is 50mm.

The modules have been designed to resist a static load of 2400Pa , and the resistance value can decrease if modules
are not mounted following the instruction above.