6
· Passengers: unnecessary people off the boat.
· All electrical equipment: off.
· Fill less than rated capacity of tank, allow for fuel expansion.
· Follow engine manufacturer’s recommendations for types of fuel and oil.
· Refer to outboard motor manual for details.
ASSEMBLY AND DISASSEMBLY
Attention ! Do not use a compressed air source (such as a compressor)
to inflate boats. Over-inflation through the use of compressed air may
result in ruptured seams and/or bulkheads.
ASSEMBLY
1. Remove any sharp object from flat surface where the boat will be
assembled and inflated.
2. Unfold and spread out the boat flat.
3. Attach the valves in their proper place. Check that the cap gasket is in
place. Attach valve retainer to each valve.
Valve Assembley
