Assembly instructions
Assembly
22 / 35
Rotary indexer TMF
Version 1.0
Mounting the complete drive on the rotary indexer
Fig. 12: Mounting the complete drive on the rotary indexer
1
Complete drive
2
Hexagon socket head cap screw EN ISO 4762
with lock washer, Type S (4x)
3
Cylinder head screw EN ISO 4762
with lock washer, Type S (8x)
4
Assembly screw (2x)
5
Flange plate
6
Rotary indexer
Attach the complete drive to the rotary indexer as follows:
The flange plate is mounted on the complete drive.
1. Use the assembly screws (4) to align and fix the flange plate (5).
2. Fix the flange plate (5) on the rotary indexer (6) with six hexagon socket head cap screws (3) and lock washers.
Tighten the screws to the specified torque.
3. Undo and remove the assembly screws (4).
4. Screw in the remaining two hexagon socket head cap screws (3). Tighten the screws to the specified torque.
5. Push the complete drive (1) onto the drive shaft.
6. Screw the flange plates with four hexagon socket head cap screws (2) and lock washers. Tighten the screws to the
specified torque.
6
5
2
3
4
1
