Disposal
Operating instructions
Version 1.0.0
Rotary indexer RTX
Page 33 of 35
7
Disposal
WARNING
Risk of environmental damage caused by improper disposal!
Improper disposal of components can cause environmental damage to persons and environment.
Disposal of the components in accordance with the applicable local rules
Environmentally compatible disposal of auxiliary substances such as chemicals, paints,
acids, alkalis, adhesives
Essentially components of the machine consists of following materials: copper (drive unit,
electrical lines) Steel, aluminium and grey cast iron (housing, structures, shaft,
bearings,
…) Plastics (tooth belt. isolation, components of bearings).
DANGER
Risk of death by electrocution!
There is an immediate risk of fatal injury due to electric shock if live components are touched.
Damage to the insulation or to individual components can cause fatal injury.
Only allow work on the electrical system to be carried out by qualified electrical
engineers.
In the event of damage to the insulation, immediately shut off the power supply and
initiate a repair.
Before starting work on active parts of the electrical system or equipment, ensure that it
is completely powered down and cannot be switched on again.
Before starting disassembly:
Disconnect all power supplies to the partly completed machinery, ensure that it cannot be reconnected
and verify that the circuit is de-energized
Wait 15 Minutes, until all live parts are full discharged
Disassemble assemblies and components, observing any local environmental protection regulations
