Takstar TS-K201, User Manual

Page: 21 / 32

20
Cell phone
OTG adapter
Splitter cable
Receiver
Headphone
C. Connecting with cell phone
1. Connect the splitter cable (buy additionally) with Φ3.5mm connector of cell
phone. If the cell phone has no Φ3.5mm connector, please use OTG adapter
(buy additionally). Refer to the figure below; Connect the receiver with the
connector marked with“ ”of the splitter cable. If you need to monitor
the recording effect, connect the headset with connector marked with
“ ”of the splitter cable. Refer to the figure below:
Cell phone
Splitter cable Receiver
Headphone
2 ．Turn on the receiver and microphone power switch. Adjust the microphone
volume to a proper level according to actual requirement.
3 ．Turn on the cell phone recording to check if it can record normally. If it has
recording problem, please refer to the trouble shooting section to solve the
problem.
Note: it is recommended to use the supplied iPhone adapter or Type C adapter,
otherwise it may lead to compatibility problem.
Portable wireless microphone
TS-K201