Takstar DA10, User Manual

Page: 5 / 10

10
DA 10
Speech Microphone
② "M" button: Click it repeatedly to switch between the KTV
mode and the SPEECH mode. When it is switched to the
KTV mode, the wireless connection is turned on at the
same time, and when it is switched to the SPEECH mode,
the wireless connection is turned off.
③ Indicator light: If it keeps lighting up green during
operation, this means sufficient power supply. If the power
can last for less than 1h, it keeps lighting up red. It flashes
red when charged. If it keeps lighting up green, this means
it is fully charged.
④ "+" button: Click it to increase the volume of the amplifier.
A total of 3 levels of volume can be chosen.
⑤ "-" button: Click it to decrease the volume of the amplifier.
It can only be minimized to about 60% of the total volume.
There is no mute function.
⑥ Cartridge: When speaking, the mouth should be as close
as possible to the pickup, generally 3-5 cm. Do not cover
the cartridge with your hands; otherwise it will easily
produce feedback.
⑦ Charging interface: Connect to the Type-C charging cable.
Please use a charging head with a specification of 5V 1.5A
and 3C certification to charge the amplifier.
⑧ Speaker: Do not put the speaker too close to people's ears
to avoid hearing damaging. Please try to keep the speaker
clean.
Note: When the product is used for the first time, it is
recommended to fully charge it first; when it is fully charged,
please stop charging the battery to avoid overcharge; if it is