Takstar CM-450, User Manual

Page: 15 / 20

⓮
CM-450
BROADADTING AND RECORDING MICROPHONED
Flat-response/Low-frequency cut off: When switched to the active position
“ ”, the microphone is essentially transparent and will give the most
natural reproduction of the source. Since this setting allows the reproduction
of ultra-low frequencies, an elastic isolation mount should be used to avoid
the transmission of unwanted low-frequency content through the microphone
stand. When switched to the position “
” , microphone introduces a
low-cut filter which helps to eliminate wind, stage and background noise. It is
also useful to compensate for proximity effects or to reduce low frequencies
that might other wise dull or cloud the desired sound.
-10dB attenuation switch: When switched to the position “ ”, the
sensitivity is original without attenuation. When switched to the position “
-10dB”, the switch reduces the signal level from the microphone cartridge
by 10dB to allow better handling of very loud sound sources. (Such as drum
for symphony orchestra, trumpet)
Pattern selection switch: Selected the setting “ ”, the polar pattern is
Omni-directional, sound is captured equally well from all directions. This
pattern is ideal for miking multiple sources and capturing overall location
⑤
⑥
⑦
PM - 3 Phantom Power:
⑤ ⑥ ⑦ ⑧
⑨ ⑪ ⑩ ⑫ ⑬ ⑭