Takstar CM-450, User Manual

Page: 13 / 20

Note : The above data are tested by the Takstar laboratory and Takstar has the
right of final interpretation .
CM-450
BROADADTING AND RECORDING MICROPHONED
⓬
■ Usage
1. Open the carrying case, fit the microphone into the shock mount, ensure the
position of the microphone on the front of the sound sources.
2. Take the PM-3 phantom power out from the carrying case, two types of
voltage can be selected: 220V or 110V, so please check the power type of the
phantom power with the local mains voltage.
3. Adjust the volume control knob of the amplifier or mixer, make the volume is
the lowest, set up the equipments according to the sketch. Turn on the power
supply, then power the microphone, the tube will give off light, which indicate
the microphone is essentially ready for operation.
4. After switching on the microphone power on the power supply unit, please
allow a few minutes for the tube to warm up so as to get the full, warm sound.
-20
-30
-40
-50
-60
( dB )
( Hz )
20 50 200 500 5K 20K
Frequency Response Graph
2K