Takeuchi TL230, Operator'S Manual, Page: 180 / 208

6-6
TROUBLESHOOTING
IF A FUSE BLOWS
If a light does not come on or the electrical
system does not work, a fuse may be blown.
Inspect the fuses.
INSPECTING AND REPLACING THE FUSE
WARNING
If the fuse blows again soon after
replacement, then the electric system is
likely faulty. It may pose a fire hazard if
not properly repaired. Contact your sales
or service dealer for advice.
1. Turn the ignition key to the OFF position
and stop the engine.
IF A FUSE BLOWS
2. Loosen the screw and remove the fuse
box cover (1).
3. Check for any blown fuses.
4. If a fuse is blown, replace it with a spare
fuse of the same capacity.
Fuse layout and circuits protected
Capacity Protected
circuit
Capacity Protected
circuit
20A Front lights
20A Tail lights
10A
Front wiper
(Option)
5A
Instrument
cluster
10A
Rear wiper
(Option)
20A
Radio
(ACC),
Reserved
15A Solenoid 10A
Controller
(Backup)
10A
Controller
(ACC)
5A
Immobilizer
(Backup)
10A
Stop
solenoid
10A Horn
5A Feed pump 10A
Interior light,
Radio
(Backup)
10A
Lever lock,
Generator
10A Controller
5A
Immobilizer
(ACC)
20A Optional