Takeuchi TB153FR, Operator'S Manual

Page: 112 / 239

110
MAINTENANCE
Service Data
Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the
chart below.
¡
Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Lubricants and greases
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0
°
C, add coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.
Part Type
Type by temperature
-22 -4 14 32 50 68 86 104
°
F
-30 -20 -10 0 10 20 30 40
°
C
Replacement
interval
Capacity
R R R R R
(US. qt.)
Engine
oil pan
Diesel
engine oil
API - CD
After first 50 hrs.
Every 250 hrs.
Upper limit:
<TB153FR>
7.4 (7.8)
<TB180FR>
10.2 (10.8)
Lower limit:
<TB153FR>
4.0 (4.2)
<TB180FR>
5.7 (6.0)
System:
<TB153FR>
110 (29.1 US.gal.)
<TB180FR>
120 (31.7 US.gal.)
Tank: 68
(18.1 US.gal.)
Hydraulic
tank Antiwear
hydraulic oil
Every 2000 hrs.
Engine
cooling
system Coolant
(water +
coolant) **
Every 1000 hrs.
<TB153FR>
8.4 (8.9)
<TB180FR>
9.5 (10)
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 250
hrs.*
Every 1000 hrs.
Slew
bearing
Working
equipment
Levers
Lithium
based
grease
EP-2
NLGI No. 2
Every 50 hrs.
Daily or every
10 hrs.
When required
As required
<TB153FR>
1.0 (1.06)
<TB180FR>
1.5 (1.6)
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mixture