Takeuchi TB153 FR, Operator'S Manual

Page: 65 / 239

63
CONTROLS
Accessories
(15) DISP (Time / Frequency) button
This system is equipped with a clock which
can show the accurate time. Even if the radio
is off, the clock still shows the time.
(16) PS / AS switch
Push this button 2 sec below will
automatically operates to show the
memorized station from 1 to 6. The signal
scaning start by pushing this button
momentarily. When a station is received the
scaning automatically stops there for 5
seconds FLASHLY and then resumes
scaning. As soon as the desired station is
found, press the this button again.
If you will auto memory push this button over
5 sec so initiates a scan of the band. Station
frequencies are either stored in order of low
of frequency for FM, or in sequence for AM,
starting from preset channel 1. If all of the
preset channels have not been filled up after
one scan, the remaining preset channels are
left unchanged, and channel 1 is recalled.
Channel 8 flashes during A.
¡ ¡ ¡ ¡ ¡
Set the time
After pressing DISP button, press tuner
button
or to correct the time. Press
tuner button to set the “hour” and tuner
button for setting the “minute”. Set the
time when the time is shown.
VOL
PS/AS
BASS
LOUD DISP
M
H
BAND
SEEK
DN
SEEK
UP
TRE
AS LOUD DISP
M
H
ND
SEEK
DN
SEEK
UP
TRE
L2C006