Takeuchi 216000002, Operator'S Manual

Page: 88 / 235

2-38
Controls
acceSSorieS
radio (for cab)
CAUTIONS ON USE
• To ensure safe operation of the machine, always be sure to keep the volume of the
radio down to a level where you can easily hear sounds from outside the machine.
• Do not use the radio for a long time when the engine is stopped. Doing so will drain
the battery and make it difficult or impossible to restart the engine.
• Be careful not to allow water or other liquids to come into contact with the radio.
Otherwise, it may result in malfunction.
NAMES OF COMPONENTS
(1) POWER button
Use this button too turn on or off the
radio.
(2) LCD
Displays the time/the receiving frequency
and the operation mode.
(3) Display button (DISP)
Pressing this button while the frequency
is displayed on the LCD changes the
display to the clock. Pressing the button
again returns to the frequency. If the
button is not pressed for five seconds,
the display returns to the frequency.
(4) Auto store/Auto seek station (AST)
Press this button to automatically assign
receivable radio stations to preset
buttons (1 to 6).
(5) Tuning button (TUNE )
Press and hold this button ( or ) for
one second or more to start seeking the
receivable stations. The seeking stops
when a station is found. To cancel tuning
halfway, press the button again.
Pressing the TUNE button starts
seeking stations with higher frequency.
Pressing the TUNE button starts
seeking stations with lower frequency.
The frequency changes as either button
is pressed in one second intervals.