Takeuchi 216000002, Operator'S Manual

Page: 89 / 235

2-39
Controls
acceSSorieS
(6) Preset buttons (1 to 6) (PRESET
STATION)
Each button can store three FM stations
(FM1, FM2, FM3) and one MW (AM)
station. For how to set these buttons,
refer to “Presetting stations”.
(7) Band button (BAND)
Pressing this button changes the band
from FM1 to FM2, FM3 and MW (AM) in
this order. The received band and its
frequency appear on the display.
(8) VOL buttons
Use these buttons to control the sound
volume. Press the button to increase
the volume and the button to
decrease the sound volume. Press and
hold each button to continuously
increase/decrease the volume.
(9) Clock zero set button (ZERO)
Use this button to set the minute to “00”
when it is between “55” to “59” or “01”
to “05”.
The LCD returns to the frequency display
if no more operation is performed for five
seconds.
(10) Auxiliary input select button (AUX)
Pressing this button changes the input
source to the external device connected
to the AUX-IN (13) jack. The display of
“AUX” appears on the LCD. Pressing the
button again returns to the radio.
(11) Auxiliary input jack (AUX-IN)
Use this jack to connect an external
audio source such as a portable music
player. Pull off the rubber cap and
connect the output terminal (headphone
jack) of the portable player to the AUX-IN
with the stereo mini-plug (35 mm) cord.
Be sure that jack is closed with the
rubber cap when not in use.
Playing the radio
1. Turn the ignition key to the ACC or ON
position, and then press the power button
(1) to turn on the radio.
2. Select the band, FM or MW (AM) by
pressing the BAND button.
3. Select the station with the preset button or
the tuning button, and adjust the volume
with the volume button.
4. To turn off the radio, press the power
button.
Selecting a station-auto select
Press and hold the TUNE button for one
second or more to start seeking stations in
the higher frequencies direction. Press and
hold the TUNE button for one second or
more to start seeking stations in the lower
frequencies direction. The radio will stop
seeking when it finds an receivable station
and start playing.
Selecting a station-manual select
The selection can be done manually. Press
the tune button to seek stations with
higher frequencies. Press the tune button
to seek stations with lower frequencies.