COPY
‑ 3 ‑
Jun./24/ 08
１４．
Drive the engine in a well-ventilated safe
place. And check that both the high-and
low-beam head light work properly. If not,
the burning-out of the bulb or the improper
cord connection may be the probable cause
for this, which please check.
７．
Install the top bridge.
NOTE: Be sure to follow the specified torque.
Torque for front fork bolt:
44 N
･
m (4.5 kgf
･
m)
Torque for steering stem nut:
74 N
･
m (7.5 kgf
･
m)
８．
Place the handle holder into the top bridge
hole, and hold the handle holder with a washer
and nut.
NOTE: Be sure to follow the specified torque.
Torque: 22 N
･
m (2.2 kgf
･
m)
９．
Slacken two screws at the lower part of the
head light case of
①
. And separate the head
light unit and the case. And place the halogen
bulb in the head light unit.
１０．
Remove the head light socket from the stock
head light, which please install onto the head
light unit which was just removed in the
preceding step 9.
１１．
Install the head light case onto the head light
stay with the screw-mounting hole facing
downward.
１３．
Arrange the wires in the head light case
neatly so the head light unit can easily be
housed. Place the head light lens with the
TOP mark upward, join the connector with
the head light socket, and then install the
head light unit with two screws.
６．
Put the turn-signal stay through the front fork,
and install the light stay loosely for now.
As for the order of the installation, please
see the figures below.
※
Install turn signals, horn, main switch and
speedometer.
１２．
Loosely tighten the bolt for holding the head
light, and tighten the turn-signal stay to the
specified torque.
Torque: 12 N
･
m (1.2 kgf
･
m)
１５．
Check the light axis of the head light, and
secure it firmly.
Torque: 12 N
･
m (1.2 kgf
･
m)
※
Never touch the glass of the halogen bulb
directly with a hand. The oily fingerprint may
cause the bulb to burn out because the oil is
likely to absorb heat. If you have touched the
bulb with your hand, wipe off the fingerprint
with alcohol.
Button head screw
Flange nut
Plain washer
Left-side front fork
Turn signal stay
Head light stay
Screw
Screw
Head light socket
Bolt
Screw
3-5-16 Nishikiorihigashi Tondabayashi
Osaka Japan
TEL : 81-721-25-1357
FAX : 81-721-24-5059
URL : http://www.takegawa.co.jp
Co.,Ltd.
