Page 15 of 15
5.
The unit is now be ready to apply the first label. If the first label is not applied square to the
bottle, utilize the adjustment screws (A) to make minor adjustments. ½ of a turn on the screw
will make a large difference in how the label is applied.
Front and Back Label Option
Setting First Label Advance:
1.
Turn both label advance dials counter clockwise to 0.0. Then turn label
spacing dial to 5.0.
2.
Cycle the machine. Focus only on the first label. Using the 1
st
label
advance pot on the left. Turn the label advance pot clockwise until the
gap between the labels stops on the peel edge.
Setting Second Label Advance:
3.
Once the first label is dispensing and stopping at the peel edge focus on
the second label. Use the 2
nd
label advance pot on the right to advance the
label so it is completely dispensed and the applicator stops at the gap.
Setting Label Spacing:
4.
Use the Label Spacing pot to adjust the spacing between the front and
back labels. Turning the pot to the + will increase the delay and your
spacing between each label. Turning it to the – will decrease your delay
and spacing.
