TAKE-A-LABEL TAL-3000R, Operation Manual, Page: 27 / 41

Page 3.7
Troubleshooting Guide
PROBLEM PROBABLE CAUSE
No Power 1. Machine Not Plugged In
2. No Main Power
3. Fuse Blown ( See page 3.5)
Label Will Not Feed 1. Label Sensor Set Up Incorrectly ( See
page 2.9 or 2.10)
2. No Power (See Above)
Labels Feed Out Non-Stop 1. Label Sensor Set Up Incorrectly (See
page 2.9 or 2.10)
2. Label Sensor Blocked
3. Fiber Optic Cables Damaged Check
For Kinks In Cables
4. Label Sensor Fiber Optic Cables
Not Aligned
(See page 2.10)
Erratic Label Feed 1. Label Sensitivity Incorrect ( See page
2.9 or 2.10)
2. Pinch Roller Not Locked
3. Worn Or Dirty Traction Roller
4. Dirty Fiber Optic Ends
5. Pinch Cam Lock Needs Adjusting
(
See page 2.12)
Label Not Aligned On Product 1. Check Product Carriage Rollers
2. Check The Product To Be Sure Its
Not Trying To Roll Out Of Carriage
3. Check Air Pressure On Product
Drive Head
( See page 2.6)
Label Dispensing Too Little/Too Much 1. Use Label A/- Function
On
Housing of Labeler To Adjust.
(See page 2.8)
Liner Keeps Ripping Or Braking 1. Check The Peel Edge Covering
2. Check Label Web For Die Cut
Too Deep