TAKE-A-LABEL TAL-3000R, Operation Manual

Page: 15 / 41

Page 2.8
L
L
a
a
b
b
e
e
l
l
P
P
o
o
s
s
i
i
t
t
i
i
o
o
n
n
Label Advance
Label Advance Position:
Before being dispensed, each label should stop near to the edge of the
peel plate, but should not come off the peel plate. Adjust the label
advance as follows:
1.
Unlock the LABEL A/- dial. The dial is located on top
of the labeler’s control unit.
2. Dispense a single label.
3. Note; if the dispensed label advanced completely off the peel plate,
and note the position of the next label still on the peel plate.
4. Turn the LABEL A/- dial in small amounts to adjust
the label advance position.
•
If the dispensed label does not come off the label web, turn the
dial to the right (to + for longer advance distance).
•
If the next label on the peel plate extends over the peel plate
edge, turn the dial to the left (to – for shorter advance
distance).
•
If the dispensed label comes off the label web and the next
label is close to the peel plate edge, the advance distance is
correct. No adjustment is necessary.
5. Repeat steps 2 through 4 until the label advances to the correct
position.
6. Once desired position is achieved, lock the LABEL ADVANCE
dial in position
.