74
I-SIZE. Following this, fasten and tighten the belt,
until the straps lie tightly against the TAKATA MINI
I-SIZE.
CAUTION!
Follow the airline’s instructions when fastening and
tightening the seatbelt.
CAUTION!
Ensure that the fastened buckle is positioned between
the two lap belt guides of the TAKATA MINI I-SIZE,
and that the straps are not twisted. If you have any
questions on this, please ask the airline staff.
Step 5 – Adjust the carry handle
Simultaneously push in the grey levers on each side
of the handle as far as they can go, and move the carry
handle forward into the vehicle position (centre
position).
Step 3 – Check the seat’s position in the aircraft
Ensure that the front section of the TAKATA MINI
I-SIZE touches the backrest of the passenger seat, and
that the TAKATA MINI I-SIZE is set at the right angle.
|<@< *:
the red line is pointing straight up, the TAKATA MINI
I-SIZE is correctly positioned.
You may think that a slightly less upright position
would be more comfortable; however, this 90-degree
angle has been proven to provide optimum safety. The
angle of your child, whatever the position of the inner
padding or shoulder straps, lies here within what is
known as the comfort zone.
Step 4 – Fasten and tighten the two-point seatbelt
[MINI_I-SIZE_056] To properly secure the TAKATA
MINI I-SIZE in the aircraft, ensure that the straps of
the two-point seatbelt run through the two blue lap
belt guides on the side bolsters of the TAKATA MINI
