29
Maintenance Method
Shower head
Shower head plate
Foaming water outlet
(consumable goods)
Rubber gasket
(consumable goods)
O-ring(consumable goods)
Shower head
Rinse the foaming water outlet in the direc-
tion shown in the figure.
Running
water
Foaming water
outlet
1)
2)
Water
discharge
side
Surface to clean
(both front and back)
Counterclockwise
Remove
Clockwise
Attach
Clockwise
1
Turn the shower head plate counter-
clockwise to detach, then remove
three parts (shower head plate,
foaming water outlet, rubber gasket)
2
Clean (rinse) the shower head plate
• The shower head plate should be cleaned
once a week.
• Clean the stains (such as scales) adhered
to the shower hole on the shower head
plate using toothbrush or similar materi-
als.
3
Clean (rinse) the foaming water outlet
• The foaming water outlet should be
cleaned once a month (approximately).
• Clean the stains (such as scales) adhered
to the foaming water outlet using a tooth-
brush or similar materials.
4
Reassembly
1) Set the foaming water outlet and the
rubber gasket onto the shower head plate
in that order.
2) With the water outlet surface of the
shower head plate facing down, turn the
shower head plate clockwise to attach it to
the main unit of the shower head.
Do not remove the O-ring.
Failure to clean the foaming water outlet regularly may lead to clogging and a sharp
foreign sound from the shower head.
CAUTION
