27
Basin
Around the mounting
fixture of the head pillow
Hair catcher
Drain cap
Hair catcher
Drain
outlet
Drain outlet
Maintenance Method
Apply cream cleanser to a soft sponge that has been wet with
water and drained fully and use this to wipe off the stains.
After cleaning, rinse fully with water and wipe carefully with a
dry cloth.
Use a soft toothbrush to clean the areas that are difficult to
reach with a sponge.
If the stain cannot be removed, use a melamine sponge wet
with water.
Use cotton buds and other materials to carefully clean around
the neck cushion and head pillow mounting fixture.
Remove the hair catcher under the drain cap and remove
the hair accumulated. Hair catcher should be considered
consumable goods. It should be replaced if they are
stained significantly or if the surface becomes deterio-
rated.
CAUTION
• Avoid using metal scrubber, hard brush, and cleanser containing alumina miner-
als. This may lead to scratching.
• Do not use materials on the resin parts, such as the tap and thermostatic control
knob, as well as metal parts with surface treatment, including neck parts. This
may lead to scratching.
The hair catchers should be cleaned as frequently as
possible. Continued use without cleaning may cause
the accumulated hair to clog the drainage, resulting in
overflowing of water and unhygienic conditions.
Cleaning should be performed every time the custom-
er’s hair is washed where possible.
CAUTION
Do not discard the hair accumulated in the hair catcher
or hair adhered to the basin into the drain. Also, do not
wash the hair without attaching the hair catcher.
Discarding the hair into the drain causes the hair to
accumulate in the drainage pipe and hose, leading to
water leakage and connection defects.
CAUTION
