NOTE
Notes for Use
6
Safety Precautions (Must be Obeyed)
Unplug the power plug during installation of the chair and parts replacement.
Unplug the power plug during installation of the chair and parts replacement. Failure to do so can result in
an accident or injury.
Precautions when using the cape holder
Do not apply excessive force to the cape holder as it can only withstand a load of 10 N (1 kgf/2.2 lbf).
Be sure to always return it to the stored state when not in use.
When storing the cape holder, be careful not to pinch the customer's or user's fingers between it and the
armrest.
CAUTION
Be careful that the power supply code does not come in contact with the adjuster
under the step.
Be careful that the adjuster does not rub against the floor and does not catch on the power supply code
when you rotate the chair for adjusting the adjuster.
And adjust it so that the chair does not turn over when the customer gets on the step.
Do not use this chair for any applications other than hairdressing/beauty-related
procedures.
This product is designed for commercial use in barber shops and beauty salons.
Only persons who are certified hairdressers or beauticians can be allowed to use this chair.
Do not place any objects other than persons in the seat.
Do not place any objects other than persons in the seat. Doing so can result in deformation or tearing of the
leather, or corrosion.
CAUTION
Immediately wipe off any chemical that spills on the chair.
Immediately wipe off any chemicals adhering to the leather or pump cover.
Recline the backrest at the end of the day
When you have finished working for the day, lower the chair to the lowest position and completely recline
the backrest.This helps to extend the service life of the chair by not applying a load to springs and cylinders.
Do not apply heat
Do not apply heat to the chair. Doing so can result in deformation or discoloration.
The maximum load of this chair is 1,350 N (135 kgf/300 lbf).
The raising speed of the seat declines as the maximum load is approached.
