(4) Using Preset Functions
1. Using the preset function
A press of the preset switch moves the chair to the preset position.
Two preset positions are available for this chair.
1 Pull the headrest out to the desired position previously if you need to use it.
2 Press the preset switch at the control panel (right or left) once.
The chair height, backrest angle and legrest angle (for synchronized legrest type) move to the preset
position.
Preset switch
How to Use
Preset switch P1
Right
Left
16
WARNING
AB-HPPN (PRIME TYPE)
Synchronized legrest type
AB-HPBN (BASIC TYPE)
Fixed legrest type
Preset switch P2
<Adjusting Preset Positions>
Although the setting positions of the preset switches are previously set when shipped from the factory, you
can change to the positions to match your customers.
Perform the following procedures to change the preset positions.
(1) Move the chair to the desired position.
(2) Turn off the power switch, and then press and hold down a preset switch (P1 or P2) while you turn on the
power switch.
(3) Continue to press and hold the preset switch for approximately three seconds until you hear an electronic
beep indicating that the position is set.
(4) Setting is completed when the electronic beep is emitted. Return the chair to its original position by using
the auto-return switch, and use the preset switch for which you have changed the setting to make sure
that the chair moves to the position you have set.
For the synchronized legrest type, the legrest moves in conjunction with the backrest.
When changing the preset positions, be very careful that the step or the customer's
feet will not contact any nearby equipment or other items.
⇒
If the chair rotation lock is released, the chair rotation gets locked automatically when you press the preset
switch.
