background image

How to Use

Adjusting the Headrest

1.

2.

3.

Note:  The headrest is unnecessary for back shampoo and haircut.

Headrest button

Headrest button

Insert the headrest while 

pressing the headrest button.

You cannot insert the headrest unless 
you depress the headrest button.

Adjust the headrest to the 

height of the customer’s head.

You can adjust the headrest to 11 height 
levels.  You can pull up the headrest 
even if you do not press the headrest 
button.
If you pull up the headrest too much, 
press the headrest button to temporarily 
lower the headrest and then adjust it 
again.

Fix the headrest at the height 

tailored to the customer.

You can fix the headrest at 11-level 
adjustment positions.  The position 
where you can hear tick when pulling 
up the headrest is the position where 
the headrest can be fixed.

Be sure to adjust the headrest to any of the 11-level adjustment positions.  Do not 
adjust the headrest to other positions.  If the headrest moves during shaving, the 
customer may be severely injured.

For back shampoo, if you recline the backrest with the headrest inserted, the chair 
or shampoo equipment may be damaged, injuring the customer.

Inserting the Headrest

Caution

6

Summary of Contents for Koken 90

















Reviews: