background image

General Safety Instructions

Safety Precautions

Disassembly and repair should only be

performed by a skilled technician 

Please read the safety precautions and notes carefully to ensure the proper use of this product.

   Before use

   About the precautions listed here

Warning

Warning

Caution

These precautions are provided for the safe use of this product and to prevent personal injury and harm to users 
and third parties. Please follow all of the precautions shown here, as they contain important information related to 
safety. TAKARA BELMONT bears no responsibility for personal injury or harm caused to the user or third parties 
in the event that the “Safety Precautions”, “Notes for Use” or the “Notes for Use with Synthetic Leather” have not 
been observed and an accident has occurred. In this event, the user who did not follow these precautions bears 
responsibility for said personal injury. Detailed information on cautionary marks is as explained below. Be sure to 
read and understand their descriptions carefully before reading the main text.

This mark warns the user that “ignorance of this display and improper use may 
cause death or serious personal injury”.

This mark warns the user that “ignorance of this display and improper use may 
cause slight to moderate personal injury or property damage”.

If improperly repaired, the chair may operate abnormally and

cause injury.

Customers must not repair or tamper with the chair, as it is

dangerous. 

If not, this may result in the body part being pinched, causing

bodily injury.

The customer or user’s hands, fingers, or body

parts must be kept away from the movable

parts of the equipment or the area surrounding

its movable parts   

Classification 

of precautions

Size and degree of imminent danger or harm

Before or during operation of the chair, sufficient care must be

taken to ensure that bodies, hands and feet, or obstructions are

not around the operating range (raise/lower direction of the chair,

recline/raise direction of the backrest, raise/lower direction of the

legrest, and the rotation direction of the chair). If care is not taken

to do so, it may result in being pinched by the chair, and may

cause bodily harm or property damage.

When operating the chair, mind the surrounding

area

Sitting on the backrest may result in bodily injury or may cause

the chair to break from falling over.

Do NOT sit on the backrest

When reclining or raising the backrest, take sufficient care to

ensure that customers’ fingers or other objects are not between

the backrest and the seat. Not doing so may result in bodily injury

from pinching or other such accidents.

Be careful when reclining or raising the backrest 

Have installation or mounting of the equipment performed by a

professional (from TAKARA BELMONT or a TAKARA BELMONT

specified representative).

The chair must be installed on flat and solid flooring.

If the chair is installed to an area where the flooring surface is

inclined at 5° or more, it may cause the chair to fall over.

Be careful during installation

Never sit on the headrest, armrest, or on the front edge of the

seat when the backrest has been reclined. Also, do not apply

more weight to the chair than necessary. Doing so may cause

the chair to fall over or break.

Do NOT sit anywhere except the designated

sitting area

Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

California Proposition 65

Do not sit on the legrest or backrest. Also, do not apply more

than the necessary weight to the chair. Doing so may cause the

chair to fall over or break. Do not apply more than the necessary

weight to the headrest or armrest. 

Do NOT apply excessive weight to any part of

the chair

To transport the chair, hold the up/down foot pedals and base

plate. Do not lift up the chair by holding the upper seat unit only.

Otherwise, the base unit may fall off and cause serious injury.

When moving the chair, make sure to hold

the following locations

2

Summary of Contents for Koken 90

















Reviews: