Takara Belmont AY-YHBYM Series, Operating Instructions Manual

Page: 9 / 24

9
Device Setup
Inner bowl
Nozzle arch
Customer side
The product is used by attaching the nozzle arch and the inner bowl to the backwash (YUME) basin and
sidewash basin and OASIS basin as shown in the figure below.
・ This product is an accessory of wash unit for use for head bath.
・ AY-YHBYMS/YMO are dedicated for use with the YUME series backwash (YUME) basin specification.
・ AY-YHBSSS/SSO are dedicated for use with the YUME series sidewash basin specification.
・ AY-YMS2/SSS2 are dedicated for use with the YUME series OASIS basin specification.
Do not use the product with other products that are not listed as compatible. Use of
the device with non-compatible products may result in injury or device damage.
・ YUME ・ YUME DX
・ YUME SWING ・ YUME ESPOIR
・ YUME SUITE ・ YUME NOBLE
・ YUME OASIS (full lie-flat posture only)
・ W SWING YUME (full lie-flat posture only)
* Follow the setting procedure in the following sections to install the nozzle arch and inner bowl.
* The product can only be used with the dual function shower head of compatible products.
* YUME OASIS and W SWING YUME are available for use in the full lie-flat posture only.
* It is not available for use with the YUME NAGOMI (IXI).
Avoid contact of the product with the customer when installing the product.
CAUTION
Compatible products
WARNING
*Note
Please be advised that the illustrations used in this Operating Instructions are those of the
AY-YHBYM*.