17
Maintenance Method
Maintenance should be performed after using the product to keep it clean at all times.
Stains left uncleaned may lead to the growth of mold.
Wipe gently with a dry, soft cloth.
Resin parts/
bag:
For severe staining
Wipe with a soft cloth wet with neutral detergent diluted about tenfold with water,
followed by wiping with a cloth wet with water, then carefully wipe with a dry cloth.
Metal parts:
Some of the product’s metal parts and mechanical sections may be sharp. Care must
be taken when handling to avoid injury to the hands and fingers.
Wipe with a dry, soft cloth.
Residual moisture may cause rust and malfunction.
Cleaning must be performed if the product is being reused after a period of non-use.
Also, be sure to check that the product operates correctly after cleaning.
Maintenance of Individual Parts
CAUTION
・
The following materials must not be used:
Volatile chemicals, such as thinner, alcohol, remover, gasoline, and kerosene, acid, alkaline or
chlorine-based detergents, antiseptic solution strongly corrosive to metals (Povidone Iodine,
sodium hypochlorite, etc.), waxes containing abrading agent, sponges containing abrading agent
and scrubbing brushes, or other cleaning tools.
・
Do not use brushes and scrubbing brushes for maintenance of the product because this may cause
scarring and make the stains more difficult to remove.
If the rubber cover becomes displaced, re-attach at the sections shown with the shaded circles .
Rubber Cover
Rubber cover
Summary of Contents for AY-YHBYM Series
Page 23: ...23 Notes...
