15
1
Hold the nozzle arch and tilt to the
front, then stop the water.
2
Drain the hot water held in the inner
bowl
Lift the neck seal and drain the water through
the drainage outlet in the inner bowl.
After the Treatment
CAUTION
If the customer has long hair
(shoulder length or longer),
the hair should be bundled
together before draining the
water because the hair may
become tangled during
drainage.
CAUTION
・
Do not tilt the nozzle arch by
holding the nozzle cover
because this may cause
damage.
・
Stopping the water before
tilting the nozzle arch to the
front may cause residual hot
water to come into contact
with the face.
3
Remove the inner bowl after water is
drained
The inner bowl should be stored in the
pocket section of the dedicated storage bag.
[See page 16]
4
Remove the shower head and return
to the shower head holder
Pull the rubber band holding the shower
head towards the customer side and remove
the shower head.
Lift the neck seal and drain the water
through the drainage outlet in the
inner bowl.
Draining method
Draining method
Nozzle cover
Rubber holder
Shower head
Rubber band
Base rubber
Drainage button
5
Drain the hot water accumulated in the
nozzle arch
Press and hold the drainage button for about
10 seconds and allow the water to drain.
Shower head stand
Nozzle arch
Neck seal
Drainage
outlet
Inner bowl
* Hot water accumulated in the nozzle arch
must be drained after every use. Otherwise,
the hot water accumulated inside the nozzle
arch may spill into the bag.
Summary of Contents for AY-YHBYM Series
Page 23: ...23 Notes...