background image

Do not touch the hot water pipe or 

mixing pipe.

The hot water pipe and mixing pipe become 
very hot. Do not touch them directly.

6

Caution

Do not cover the drain outlet when

this product is not going to be used.

Do not cover the drain outlet with the drain cap,
towel, or shampoo cloth after finishing the work.
Water may overflow the basin when water is 
improperly discharged or a small amount of hot 
water is discharged due to an increase 
in water pressure during the night, 
resulting in water leakage.
Be sure to remove the trap 
cover from the drain outlet 
when the product is not in use.

Avoid direct sunlight or heat from a

stove.

Avoid direct sunlight or heat from a stove. Failure
to follow this instruction may cause discoloration
or degradation of the door.

Don’t splash the counter, the back

of operation panel and the side and 

back of basin box.

Don’t splash the counter, the back of operation 
panel and the side and back of basin box. 
Failure to follow this instruction may cause 
damage to the product.

Do not drop something heavy to 

the basin.

Do not place or drop something heavy to the
basin. Failure to follow this instruction may 
cause damage such as scratches or cracks.

Do not hit the resin (plated) parts

with objects.

Do not hit the resin (plated) parts, such as the 
tap and temperature control knob with hard 
objects. Failure to follow this instruction may 
cause flaws or cracks on the plated surface, so 
that the plated surface is peeled and result in 
injury.

After use,wipe water away from all 

exept the basin.

Keeping the main body with water on, it may 
cause damage or make dirt and difficult to 
remove.

Always wipe the floor clean if it is wet.

Wipe the floor as soon as possible if it is wet after
shampooing. Failure to follow this instruction may
damage the floor or cause degradation and
malfunctions to parts in contact with the floor.

Close the knob firmly.

After finish using or shampooing, turn the knobs 
firmly and turn the water off completely. 
Failure to turn the water off completely may 
cause water leakage.

Install the maintenance door correctly.

Install the maintenance door correctly after 
cleaning up. When the door fall down during 
operation, it may cause damage to the product
or injury.

Hold the handlebar from below.

If holding the handlebar from the top, your hand 
may hit the counter when pull the basin close.

Summary of Contents for AY-CU-SX1





























Reviews: