Takara Belmont AY-CU-SX1, Operating Instructions Manual

Page: 19 / 28

10
Check that can pull the basin open and close smoothly.
9
Pull the laver toward free position on the right side.
8
Attach the drain hose.
19
*Set the drain hose by indication mark.
Then tighten the hose band.
Free position
Lever
Solution Causes Inspection
・
Can pull the basin open and
close smoothly.
・
The basin doesn’t hit the
counter.
・
Can pull the basin close
completely.
・
Water preventing plate
doesn’t appear outside.
・
Water preventing board is
displaced to the basin side against
the drain hose.
Get the water preventing boad back to
the basin back side and attach the
drain hose again in
proper position.
・
The drain hose hits the basin.
・
The direction of the elbow with
drain hose is not appropriate.
Pull the basin out and attach the drain
hose again in proper position.
Indication mark
Drain hose
Set the drain hose as the picture above
by the indication mark.
Hose band
Indication mark
Drain hose
Elbow
The water preventing board is
displaced to the front
Get the
water preventing
board back
to the basin
back.
Water preventing board often
catch the drain hose.
Push the drain hose and get
it back.
Caution
water preventing
board