Takara Belmont AB-LGF, Operation Manual

Page: 24 / 40

Preset switch
1 Pull the headrest out to the desired position previously if you need to use it.
2 Press the preset switch on the control panel once.
The chair moves to the previously set position.
But when you adjusted seat position of AB-LGSX,LGLX,seat position moved
Neutral potision.
Right Left
<Changing Settings of the Preset Function>
Preset switch P1
Preset switch P2
(5) Using Preset Functions
1. Using the preset function
If any switch except for the legrest heater switch,seat arange mode switch is pressed while
the chair rotation lock is released, chair rotation is engaged and then locked.
Be very careful when setting the position of the legrest that the
customer's leg (step) will not contact equipment or other items near the
chair.
WARNING
HOW TO USE
23
A press of the preset switch moves the chair to the preset
position. You can set up to two optional positions of this
chair.
What is the preset function? ⇒
Although the setting positions of the preset switches are previously set when shipped from
the factory, you can change to the positions to match your customers.
But don’t change the seat position of AB-LGSX,LGLX seat arange function.
Perform the following procedures to change the preset positions.
(1) Move the chair to the desired position.
(2) Turn off the power switch, and then press and hold down a preset switch (P1 or P2)
while you turn on the power switch.
(3) Continue to press and hold the preset switch for approximately three seconds until you
hear an electronic beep indicating that the position is set.
(4) Setting is completed when the electronic beep is emitted. Return the chair to its original
position by using the auto-return switch, and use the preset switch for which you have
changed the setting to make sure that the chair moves to the position you have set.