Inner pipe
Guide
Lock
supporting rod
HOW TO USE
Remove or Install the headrest.
18
When the headrest is not used, the headrest inner
pipe can be removed from the chair. To install the
pipe, insert the inner pipe into the lock supporting
rod while pressing the headrest storage button (or
headrest operation button) and aligning with the
guide.
•
Check that there are no impediments in the surrounding area when
rotating the seat with the headrest pulled out.
•
Do not apply excessive force to the headrest or strike it from above
when it is pulled out. Doing so can result in damage.
•
Be careful not to pull up the headrest more than necessary because
doing so will make the headrest to come off the chair. Be careful when
operating the headrest that fingers and other body parts are not pinched
between the area around the headrest storage button (or headrest
operation button) or in between the backrest.
CAUTION
Summary of Contents for AB-LGF
Page 39: ...NOTE...
