TAJIMA TEJT II -C, User Manual

Page: 4 / 45

Contents
1.
Changing procedure of the frame
1.
Turn OFF the power switch, or select sleep mode................................ p.1-2
2.
To change frame ................................................................................... p.1-2
3.
Turn ON the power switch, or release sleep mode ............................. p.1-19
4.
Change of setting on the operation panel ........................................... p.1-19
2.
Set the frame.
1.
Cap frame ............................................................................................. p.2-2
2.
Tubular goods frame............................................................................. p.2-5
3.
Adjustment of each part
1.
Wide cap frame..................................................................................... p.3-2
2.
Semi-wide cap frame ............................................................................ p.3-3
3.
Tubular goods frame............................................................................. p.3-5
4.
Adjustment of tension of drive wire ....................................................... p.3-6
4.
Assembling of cap frame unit
1.
Assembling of cap frame unit................................................................ p.4-2
2.
Adjustment of tension of drive wire ....................................................... p.4-4
Perform checking before starting embroidery. .
To prevent the presser foot (1) from interference with the lid frame (2), make a space of 15 mm or more between
the bottom part of the visor (3) and the base of embroidery design (4). Using the presser foot (1with interference
with the lid frame (2) could cause damage of the machine and displacement of design.
Embroidering to the vicinity of top part of cap will cause needle plate or
rotary hook cover to touch the inner part of cap and result in design
displacement. Check embroidery space, and then perform working.
!
CAUTION
3
4
2
1
4
3
15mm
Embroidery design
KY02